Supports SP and WDRR queue scheduling methods, with a congestion avoidance (Tail Drop) mechanism, and up to 8 QoS hardware queues.
Supports management port rate, duplex, auto-negotiation, and port mode.
Supports loop protection.
Supports load balancing based on MAC, IP, L4, and port.
Supports suppression of multicast, broadcast, and unknown unicast packets, with multicast bandwidth control granularity of 1%/1 pps.
Supports one-to-one and many-to-one mirroring based on flow, with support for only one mirror group.
Supports port-based VLANs.
Supports static address filtering, and IGMP snooping for V1 and V2.
Supports MAC filtering time, MAC address table clearing, MAC address binding, maximum MAC count configuration, blacklist data, and port isolation.
The PE-S2200-16G4F is a fully gigabit light-managed Ethernet switch that offers 16 10/100/1000 Mbps RJ45 ports and 4 adaptive 100/1000 Mbps SFP ports. It supports line-speed forwarding on all ports and port-based VLANs, making network monitoring, traffic regulation, and data forwarding control easy to implement. This product features a highly integrated design, is lightweight, and is user-friendly, making it suitable for medium to large enterprise offices. It employs store-and-forward technology combined with dynamic memory allocation to ensure effective distribution to each port while also incorporating flow control to minimize packet loss during transmission and reception. Leveraging gigabit network technology maximizes efficiency and minimizes bottlenecks in network transmission, showcasing strong advantages in high-demand network resource usage and demonstrating good adaptability. Additionally, it automatically adjusts signal strength based on cable length and workload, effectively reducing energy consumption without compromising device performance, thus promoting environmental protection.
Hardware Specification
| Model | FR-S2620GS | Packet Buffer | 3Mbits |
| Chipset | CTC2118+CTC21108 | Jumbo Frame | 9600Bytes |
| Standards | IEEE 802.3i、IEEE 802.3u、IEEE 802.3ab、IEEE 802.3x | LED indicators | Per Device Power：Green Per-Port Link/Act：1000M:Green 100M:Orange |
| Ports | 16*10/100/1000Mbps Auto-Negotiation ports（Auto MDI/MDIX，4*100/1000Mbps SFP | Power Supply | AC 100-240V/50-60Hz DC 12V/1.8A |
| Network Media(Cable) | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) 1000Base-SX:62.5μm/50μm MMF(2m~550m) 1000Base-LX:62.5μm/50μm MMF(2m~550m)Or 10μm SMF（2m~5000m） | Dimensions（L×W×H） | 440*208*44mm |
| Transfer Method | Store-and-Forward | Operating Temperature | 0℃ ~ 45℃ |
| MAC Address Table | 8K | Storage Temperature | -40℃ ~70℃ |
| Switching Capacity | 40Gbps | Operating Humidity | 10%~90% non-condensing |
| Packet Forwarding Rate | 29.76Mpps | Storage humidity | 5%~90% non-condensing |
Software Specification
| Mac | Support static configuration and dynamic learning of MAC addresses. Support viewing and clearing MAC addresses. | ACL | Support adding, deleting MAC ACL and IPV4 ACL via the WEB |
| VLAN | Support setting management VLAN Support setting port VLAN type Support 802.1Q | QoS | Support configuring the ingress and egress rates of ports Support priority trust modes, including port, vlan, and DSCP Support DSCP and port priorities Support setting unicast and multicast SP and DWRR for ports |
| Loop Protection | Support BPDU protection, root protection, and loop protection | Reliability | Support link aggregation in static/LACP modes Support UDLD for one-way link detection Support Ethernet OAM |
| Multicast | Support IGMP v1/v2 Support IGMP Snooping Support IGMP Fast Leave | Security features | Support suppression function for multicast, broadcast and unknown unicast packets. Support port isolation |
| DHCP | Support DHCP Relay Support DHCP Client Support DHCP Snooping | Management and maintenance | Support MQTT Support management via browser-based WEB |
Perfina Group All Rights Reserved
